PLANET WFT-201 - Manual (Page 13)

11
• Cold Start trap: to set the trap for rebooting the device (default = enable).
• Authentication Fail Trap: to set the warning trap when the community name of the device and
workstation are different (default = enable).
• MC Link Up Trap: to enable the trap that if other device has linked up.
• Warm Start Trap: to enable a trap that if the device was restart.
• MC Broken Trap: to enable the trap that announcing the WFT-20x was destruct.
• MC Link Down Trap: to enable the trap that if the linked of the device was pulled down.
4.1.3.7 Device Status
This page shows that the device’s copper and fiber linking status.
4.2 Configure Through Web browser
1. Open up the Internet Web browser.
2. Enter the IP address http://192.168.1.1 (the factory-default IP address setting) to the
URL web address location.
3. Enter the user name and password you have configured (the default Login name and
password are both “root).
4. The web configuration will be shown. Point the selections in the left side of the menu
screen. The menu includes System Reboot, Factory Reset, Image Update, Device
Status, General Configuration, System Configuration, Device Configuration and SNMP
Configuration and that to be explainde in the next section.
EM-WFT20xv1.indd 2004/11/5, �� 12:01 11