PLANET ICA-HM830W - Manual (Page 10)

Rear View
Interface Description
Power Jack
The input power is DC 12V, 2A.
Note：
ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
RJ-45 LAN socket
Connect to PC or Hub/Switch.
For connect to 10Base -T Ethernet or 100Base-TX Fast
Ethernet cabling. This Et hernet port built auto-ne gotiation
protocol can detect or negotiate the transmission speed of the
network automatically. Please use CAT-5 cable to connect the
Network Camera to a 100Mbps Fast Ethernet network switch
or hub.
Power / Status LED (orange color)
This LED will be flashin g while camera DC power is on
camera starting, and this LED light while camera ready.
Network LED (green color)
This LED will be flashing while the ca mera accessing of the
camera.
MicroSD Card Slot
The IP Camera has built-in a Micro SD card slot accepts Micro
SD memory card for image / video event recording.
Audio Out
Connect a loud speaker to the IP Camera. This is for voice
alerting and two-way audio.
Audio In
Connect a microphone to the IP Camera.
GPIO
The 7 pin terminal block includes 4 input ports and 1 output
ports.