Conference control – PLANET WIPG-300H User Manual
Page 58
PLANET 802.11n Wireless Interactive Presentation Gateway
WIPG-300H
5.3. Conference Control
This function allows you to host a meeting without the projector cable swapping, and each participant is able
to show their own presentation easily. Please follow the steps below to execute Conference Control.
Step 1. Click “Conference Control”.
Step 2. Enter the password. The default value is “moderator”. Then press Login button.
Figure 5-3
Step 3. After login, you can see a user list on the screen which indicates the clients who have already logged
in into the WIPG utility. There are three columns, “Name”, “Play Control” and “IP Address”.
There are six buttons:
Play (Full Screen)
Play Split #1
Play Split #2
Play Split #3
Play Split #4
Stop
Figure 5-4
58