Webslides setup – PLANET WIPG-300H User Manual
Page 70
PLANET 802.11n Wireless Interactive Presentation Gateway
WIPG-300H
Step 5. After a few minutes, a complete message will show on the screen.
Step 6. Power off the WIPG-300H and then power on it again.
Step 7. Login the web UI, and click Reset to Default to take effect.
New firmware versions posted at the website of PLANET Technology can be downloaded for
free. There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use.
When you upgrade its firmware, you may lose its current configurations. Do not turn off the
WIPG-300H while the firmware is being upgraded; otherwise, the WIPG-300H may be damaged.
5.4.8. Webslides Setup
Click on “WebSlides Setup” option, you can: “Adjust Auto Refresh Interval”, or activate “Access
Password Control” Please pay attention on the note for information.
Figure 5-13
70