PLANET WIPG-300H - Manual (Page 69)

PLANET 802.11n Wireless Interactive Presentation Gateway
WIPG-300H
Click the Apply button to restore the WIPG-300H to the factory default settings.
5.4.7. Firmware Upgrade
This page allows you to upgrade the WIPG-300H firmware to new version. Please note: Do NOT power off
the device during the upload because it may crash the system.
Figure 5-12
If it is necessary to upgrade the firmware, please follow the steps below to operate carefully.
Step 1. First, download the latest firmware image file from PLANET website.
Step 2. Click Browse button to specify the file you want to upgrade.
Step 3. Click Upgrade button to start.
Step 4. There will be a warning message shown and countdown counter on the screen.
69