PLANET WNRT-300 - Manual (Page 11)

User’s Manual of WNRT-300
-5-
Wireless Mode
 AP
 WDS
 Repeater (WDS+AP)
 Universal Repeater (AP+Client)
Encryption Security
WEP (64/128-bit) encryption security
WPA-Enterprise / WPA2-Enterprise (TKIP/AES)
WPA-Personal / WPA2-Personal (TKIP/AES)
802.1x Authentication
Provide wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Support WPS (Wi-Fi Protected Setup)
Wireless Security
Enable/Disable SSID Broadcast
WMM(Wi-Fi Multimedia): 802.11e Wireless QoS
IAPP(Inter Access Point Protocol): 802.11f Wireless Roaming
Wireless Advanced
Provide Wireless Statistics
Internet Connection
Type
Shares data and Internet access for users, supporting following internet access:
 PPPoE
 Dynamic IP
 Static IP
 PPTP
 L2TP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding, and DMZ
Built-in firewall with IP address/ MAC address/ Port/ URL filtering
Support ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection
Firewall
Support 802.1Q VLAN up to 4
Routing Protocol Static / Dynamic (RIP1 and 2) Routing
VPN Pass-through PPTP, L2TP, IPSec, IPv6
Built-in DHCP server supporting static IP address distributing
Support UPnP, Dynamic DNS
Support IGMP Proxy
Support 802.1d STP (Spanning Tree)
LAN
IP / MAC-based Bandwidth Control
Web-based (HTTP) management interface
SNTP time synchronize
Easy firmware upgrade
System Management
System Log supports Remote Log
Standards Conformance
IEEE Standards
IEEE 802.11n (1T1R, up to 150Mbps)
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Flow Control
Others Protocols and
Standards
CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP
Environment
Temperature
Operating: 0 ~ 40 Degree C
Storage: -40 ~ 70 Degree C