Ap mode, Client mode – PLANET WNRT-300 User Manual
Page 16
Advertising
User’s Manual of WNRT-300
-10-
3.2.2. AP Mode
In AP Mode, the NAT (Network Address Translation) function and DHCP server are both disabled, and all wireless
clients obtain the IP address from the network device connected with LAN port of the WNRT-300. They can
certainly assign the IP address for themselves as well in the Control Panel of Windows. The WNRT-300 is
supposed to bridge to the Ethernet directly by UTP cable.
Figure 3-2
3.2.3. Client Mode
In Client Mode, the WNRT-300 is supposed to act as a wireless station for the PC. Users can site
survey the available local AP and choose someone to connect with.
Figure 3-3
Advertising