PLANET WNRT-633 - Manual (Page 17)

User’s Manual of WNRT-633
-10-
Chapter 3. Connecting to the Router
3.1 System Requirements

Broadband Internet Access Service (Cable/xDSL/Ethernet connection)

One Cable/xDSL Modem that has an RJ-45 connector (not necessary if the Router is
connected directly to the Ethernet.)

PCs with a working Ethernet Adapter and an Ethernet cable with RJ-45 connectors

PC of subscribers running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC
OS 9 or later, Linux, UNIX or other platform compatible with
TCP/IP protocols

The above PC installed with WEB Browser
1. The Router in the following instructions is named as PLANET WNRT-633.
2. It is recommended to use Internet Explore 7.0 or above to access the Router.
3.2 Installing the Router
Before installing the Router, make sure your PC is connected to the Internet through the broadband
service successfully at this moment. If there is any problem, please contact your local ISP. After that,
please install the Router according to the following steps. Don't forget to pull out the power plug and
keep your hands dry.
Step 1. Power off your PC, Cable/xDSL Modem, and the Wireless Router.
Step 2. Locate an optimum location for the Wireless Router. The best place is usually at the center of
your wireless network.
Step 3. Adjust the direction of the antenna. Normally, upright is a good direction.
Figure 3-1 Adjust the direction of the antenna