PLANET WNRT-633 - Manual (Page 47)

User’s Manual of WNRT-633
-40-
Figure 5-3-5 PlanetDDNS Settings
Step 1. Enable DDNS, and then select “PLANET DDNS”.
To set up for DDNS, follow these instructions:
Step 1. Type the Domain Name you received from dynamic DNS service provider.
Step 2. Type the User Name for your DDNS account.
Step 3. Type the Password for your DDNS account.
Step 2. Go to “Security Setup-> Security” page to allow remote access from WAN port.
Figure 5-3-6 Enable Web Access on WAN
Step 3. Apply the settings, and ensure you have connected the WAN port to the internet by Ethernet
cable.