PLANET WNRT-633 - Manual (Page 42)

User’s Manual of WNRT-633
-35-
Figure 5-3-1 WAN Interface Setup screenshot
The page includes the following fields:
Object Description
Please select the corresponding WAN Access Type for the Internet, and fill
the correct parameters from your local ISP in the fields which appear
below.
DHCP Client Select DHCP Client to obtain IP Address information
automatically from your ISP.
WAN Access Type
Static IP Select Static IP Address if all the Internet port’s IP
information is provided to you by your ISP (Internet Service
Provider). You will need to enter the IP address, subnet
mask, gateway address, and DNS address provided to you
by your ISP.
Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot
(x.x.x.x). The Router will not accept the IP address if it is not
in this format.
IP Address
Enter the IP address assigned by your ISP.
Subnet Mask
Enter the Subnet Mask assigned by your ISP.
Default Gateway
Enter the Gateway assigned by your ISP.