5 parameter setting – PLANET NVR-1615 User Manual
Page 26
16-Channel Network Video Recorder
NVR-1615
26
Vendor:
You may select camera vendor or use ONVIF protocol for camera connection.
Detect:
Check camera available and receive camera model name.
Camera Name:
Key-in camera name.
IP Address:
Key-in camera’s IP address.
HTTP Port:
Set up camera’s HTTP port, default is 80.
RTSP Port:
Set up camera’s RTSP port for TCP streaming, default is 554.
Account:
Set up the login user name of camera.
Password:
Set up the login password of camera.
5.1.5 Parameter Setting
Profile:
Select video codec and resolution for live viewing and recording.
FPS:
Select FPS for live viewing and recording.
Protocol:
Select protocol HTTP / TCP and UDP.
Rate Control:
Select EVBR or CBR for better video performance.
Quality:
Select video quality by numbers.
Enable Audio:
You have to enable audio for two-way audio function.
Audio Recording:
Enable it for audio recording.
Two-way Audio:
Enable it for Two-way Audio function.
Input Gain:
Adjust the gain to reduce the input audio noise.
Output Gain:
Adjust the gain to reduce the output audio noise.
The parameter dialogs are different for each vendor. It depends on camera’s
capability.
Add Camera:
1. Click “Search” button and wait for search job to finish.
2. Select a camera on search result list.
3. Preview live streaming video on preview window to confirm current camera.
4. Click “Add” button to add selected camera into system.