System setting, 1 device information, 2 date & time info – PLANET NVR-1615 User Manual
Page 31: 1 device information 5.4.2 date & time info
16-Channel Network Video Recorder
NVR-1615
31
5.4. System Setting
5.4.1 Device Information
The “Device Information” provides the general information of the device such as firmware
version and model name.
Model Name:
Display model name.
Device Title:
Key-in device title here.
Software Version:
Display current firmware version
5.4.2 Date & Time Info
Current Time:
Display current time.
Server Date & Time:
Display current system date-time.
Adjust:
Manual:
Click setting to approach date-time setting dialog and select current date and time now;
click “OK” to change system time or click “Cancel” button to abort configuration.
Synchronize with NTP (default):
Enable synchronize date-time with NTP service.
NTP Server:
Key-in NTP server IP or domain name. If you use the domain name to connect
NTP server, the DNS service must be enabled.
NTP Sync Interval:
Select time period to synchronize with NTP service.
Time Zone:
Select the time zone of NVR location.
Daylight Saving:
Enable or disable daylight saving mode.
Daylight Saving Start Time:
Configure daylight saving start time; it works with daylight
saving mode when enabled.
Daylight Saving End Time:
Configure daylight saving end time; it works with daylight
saving mode when enabled.
Daylight Saving Offset:
Configure daylight saving offset time with current time; it works
with daylight saving mode when enabled.
Auto Login:
Enable auto login mode to login with defined user name and password when
system boots up.