Motion detection setting – PLANET NVR-1615 User Manual
Page 33
16-Channel Network Video Recorder
NVR-1615
33
5.6. Motion Detection Setting
You may set up to 10 regions of each camera for motion detection setting.
Select a camera:
Click on camera list and select a camera to set up motion detection.
Add new motion detection:
Click “Add” button to insert new motion window and then
the new window will appear on the left-upper corner.
Enable motion window:
Check the window name to enable motion detection.
Modify motion detection area:
Move mouse cursor to motion window border, and drag
cursor to resize motion window. Drag mouse cursor on motion window to re-position of motion
window.
Remove motion window:
Click on motion window or window’s name to set up focus
window and then click “Delete” button to remove it.
Modify motion parameter:
Click on motion window or window’s name to set up focus
window and then edit its motion parameters. You must click “Update” button to save modified
values, otherwise the settings will be lost.
Name:
Key-in motion window’s name.
Include / Exclude:
Include indicates system will detect motion inside of window area.
Exclude indicates system will detect motion outside of window area.
Object Size:
Set up motion detection object size whose value is between 0 and 100. The
larger value indicates the object is bigger in the defined detection area
.
Sensitivity:
Set up motion detection sensitivity whose value is between 0 and 100.The
larger value indicates the motion detection is more sensitive
.