FujiFilm X-T10 - Manual (Page 103)

87
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
Using a Mount Adapter
■ Color Shading Correction
Color (shading) variations be-
tween the center and edges
of the frame can be adjusted
separately for each corner.
SET NEXT
To use color shading correction, follow the steps
below.
1 Rotate the rear command dial to
choose a corner. The selected cor-
ner is indicated by a triangle.
2 Use the selector to adjust shading
until there is no visible diff erence in
color between the selected corner
and the center of the image. Press
the selector left or right to adjust colors on the
cyan–red axis, up or down to adjust colors on
the blue–yellow axis.
R To determine the amount required, adjust color
shading correction while taking photos of blue sky
or a sheet of gray paper.
■ Peripheral Illumination Correction
Choose from values between
–5 and +5. Choosing positive
values increases peripheral il-
lumination, while choosing
negative values reduces pe-
ripheral illumination. Positive values are recom-
mended for vintage lenses, negative values to
create the eff ect of images taken with an antique
lens or a pinhole camera.
R To determine the amount required, adjust periph-
eral illumination correction while taking photos of
blue sky or a sheet of gray paper.
0
CANCEL SET