FujiFilm X-T10 - Manual (Page 70)

54
Choosing an Exposure Mode
Manual Exposure (M) Manual Exposure (M)
Exposure can be altered from the value suggested by the camera
by rotating the auto mode selector lever to
z and setting both
shutter speed and aperture to values other than A. M will appear
in the display.
R At settings other than 180X, shutter speed can also be adjusted in
increments of 1 / 3 EV by rotating the front command dial.
R The manual exposure display includes an exposure indicator that
shows the amount the picture would be under- or over-exposed at
current settings.
Aperture mode switch
01 0.5 1.0 1.5 2.0 3.0 5.0 10
M 5.6 400 4000
Exposure indicator
Exposure Preview Exposure Preview
To preview exposure in the LCD monitor, select ON for A SCREEN
SET-UP > PREVIEW EXP. IN MANUAL MODE. Select OFF when
using the fl ash or on other occasions on which exposure may
change when the picture is taken.