FujiFilm X-T10 - Manual (Page 96)

80
Interval Timer Photography Interval Timer Photography
Follow the steps below to confi gure the camera to take photos automatically at a preset interval.
1 Press MENU/OK in shooting mode to display the shooting menu. Press the selector
up or down to highlight o INTERVAL TIMER SHOOTING and press MENU/OK.
2 Use the selector to choose the interval and number of shots. Press MENU/OK to
proceed.
INTERVAL/NUMBER OF TIMES
INTERVAL NUMBER OF TIMES
END CANCEL
001
2
1
24
23
0
01 00 h m s
3 Use the selector to choose the starting time and then press MENU/OK. Shooting
will start automatically.
START WAITING TIME
ESTIMATED START TIME 11:00 PM
START CANCEL
LATER h m
2
1
24
23
0
00
Q Interval timer photography can not be used at a shutter speed of B (bulb) or during panorama or multiple
exposure photography. In burst mode, only one picture will be taken each time the shutter is released.
R Use of a tripod is recommended.
R Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and
CP-W126 DC coupler.
R The display turns off between shots and lights a few seconds before the next shot is taken. The display can be
activated at any time by pressing the shutter button all the way down.