Roland SP-404MKII Creative Sampler and Effector - Manual (Page 29)

Using the Effects
29
Using the Effects
You can use the built-in effects on the SP-404MK2 to process the audio in unique ways.
Use the built-in effects on the SP-404MK2 by assigning them to a bus (an audio routing inside the SP-404MK2).
With BUS 1 and BUS 2, you can apply the effects that are appropriate for your performance, per sample. BUS 3 and BUS 4 are
mainly used to apply effects to the overall sound output from the SP-404MK2.
There are two kinds of bus routings (in connection order) that you can select as you like.
Refer to “ Configuring the Effect Routing (P.108)” for how to edit the bus routings.
To switch between DRY Routing parameters, see “ DRY Routing (P.128)” in EFX SET.
Adding Effects to a Sample (BUS FX)
You can use the various effects built into the SP-404MK2 to process the playback audio in unique ways.
1. Press the effect buttons.