Switching rolls when paper runs out – Epson SureColor P8570DL 44" Wide-Format Dual Roll Printer with High-Capacity 1.6L Ink Pack System User Manual
Page 233
233
Switching Rolls when Paper Runs Out
When the same type of paper is loaded in Roll 1 and Roll 2, you can prioritize the roll paper with the least
amount of paper remaining, and automatically switch to the second roll when the paper runs out to
continue printing without interruption.
Note:
The appearance of the print window may differ slightly from those shown here, depending on the
Windows or Mac version you are using.
1. Load paper of the same type and width into Roll 1 and Roll 2.
2. Select
>
General Settings
>
Printer Settings
>
Paper Source Settings
>
Roll Paper Setup
>
Roll Switching
>
Auto
>
Paper Length
from the printer’s control panel.
3. Select
Remaining Amount Priority
.
Note:
To prevent the roll paper from being switched during printing, select
Data Length Priority
,
and select the remaining roll paper management settings before printing. Select
Disable
to print
regardless of the amount of paper remaining.