Epson Home Cinema 4010 Pixel-Shifted UHD 3LCD Home Theater Projector - Manual (Page 128)

128
3. Select the Reset menu and press Enter .
4. Select Reset Lamp Hours and press Enter .
You see a prompt asking if you want to reset the lamp hours.
5. Select Yes and press Enter .
6. Press Menu or Esc to exit the menus.
Parent topic: Projector Lamp Maintenance
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.