Epson Home Cinema 4010 Pixel-Shifted UHD 3LCD Home Theater Projector User Manual
Page 61
61
4.
Press the arrow buttons on the remote control or the control panel to adjust the position of the
projected image as necessary.
1
Maximum horizontal range (H × 47%)
2
Maximum vertical range (V × 96%)
3
1/2 the vertical height of the image
4
1/2 the horizontal width of the image
Note:
You cannot move the image to both the horizontal and vertical maximum values.
5.
When you are finished, press the
Esc
button on the control panel or remote control.
Note:
When adjusting the image height, position the image lower than where you want it to be and then
move it up. This will help prevent the image from moving down after adjustment. The image is clearest
when the lens is at the home position. To move the lens to the home position, press the arrow buttons on
the remote control or the control panel to move the image towards the center of the screen until it stops
at the home position.
Parent topic: