Installing batteries in the remote control – Epson Home Cinema 4010 Pixel-Shifted UHD 3LCD Home Theater Projector User Manual
Page 31
Advertising
![background image](/files/868825/content/doc031.png)
31
2.
Connect the other end to the projector's
Trigger Out
port.
3.
Turn on the
Trigger Out
setting in the projector's
Extended
menu.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Caution:
Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1.
Remove the battery cover.
Advertising