Epson Home Cinema 4010 Pixel-Shifted UHD 3LCD Home Theater Projector User Manual
Page 133
133
Power light
Status light
Lamp light Temp light
Status and solution
Blue
Flashing blue
Off
Off
Warming up; wait for an image to
appear
Shutting down; when the
Status
light
stops flashing, you can unplug the
projector
Off
Off
Off
Off
Standby or sleep mode
Blue
Varies
Off
Flashing
orange
Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Off
Flashing blue
Off
Orange
Projector has overheated and turned
off; leave it turned off to cool down for
about five minutes; after the fan has
stopped, do the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on
High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help