Dell E2020H 20" 16:9 TN Monitor - Manual (Page 37)

Setting up the monitor │ 37
Removing the stand
NOTE: To prevent scratches on the screen when removing the stand,
ensure that the monitor is placed on a soft and clean surface.
NOTE: The following procedure is applicable for the stand that shipped
with your monitor.
To remove the stand:
E2420H
1. a. Place the monitor on a soft cloth along the desk.
b. Remove VESA cover to access the release button.
2. a. Use a long and thin screwdriver to push the release latch located in a hole just
above the stand.
b. Once the latch is released, remove the base away from the monitor.
c. Press down on the quick release tab latch on the bottom of the base to separate
base from stand riser.