Dell E2020H 20" 16:9 TN Monitor - Manual (Page 62)

62 │ Operating your monitor
When the monitor enters Power Save Mode, the following message appears.
Dell XX Monitor
Going into Standby mode…
EXX20H
EXX20H
Dell 2X Monitor
Going into Standby mode…
E2X20HS
E2X20HS
If VGA or DP or HDMI cable is not connected, a floating dialog box as shown below appears.
The monitor will enter Power Save Mode after 4 minutes if left at this state.
E1920H
E2020H
E2220H
E2420H
E2720H
Dell XX Monitor
No DP Cable
www.dell.com/EXX20H
The display will go into Power Save Mode in 4 minutes.
EXX20H
?
E2420HS
E2720HS
Dell 2X Monitor
No HDMI Cable
www.dell.com/E2X20HS
The display will go into Power Save Mode in 4 minutes.
E2X20HS
?
See Troubleshooting for more information.