Dell UltraSharp 49 U4924DW 49" WQHD Ultrawide Curved Monitor - Manual (Page 82)

82
│
Operating the monitor
Activate the computer and the monitor to gain access to the OSD .
NOTE: The message may be slightly different according to the
connected input signal.
If either USB Type-C, DisplayPort, or HDMI input is selected and the corresponding
cable is not connected, a floating dialog box as shown below appears.
NOTE: The message may be slightly different according to the
connected input signal.
When the monitor is under DP/HDMI input and a USB Type-C cable is connected to
a notebook that supports DP Alternate Mode, if
Auto Select for USB-C is enabled,
the following message appears:
When Factory Reset is selected, the following message appears: