Enterasys Networks 2G4072-52 - Manual (Page 17)

N Standalone Series Installation Guide xv
Preface
This guide provides an overview, installation and troubleshooting instructions, and
specifications for the Enterasys Matrix
® N Standalone (NSA) Series 2G4072‐52. For
information about the CLI (Command Line Interface) set of commands used to configure
and manage the 2G4072‐52, refer to the Enterasys Matrix N Standalone Series Configuration
Guide.
Who Should Use This Guide
This guide is intended for a network administrator responsible for installing and setting
up the 2G4072‐52.
Important Notice
Depending on the firmware version used in the Enterasys Matrix N SA, some features
described in this document may not be supported. Refer to the Release Notes shipped
with the Enterasys Matrix N SA to determine which features are supported.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.