Enterasys Networks 2G4072-52 User Manual
Page 45
Completing the Installation
N Standalone Series Installation Guide 3-19
2.
At the login prompt, enter one of the following default user names:
–
ro for Read‐Only access,
–
rw for Read‐Write access, or
–
admin for Super User access. (This access level allows Read‐Write access to all
modifiable parameters, including user accounts.)
3.
Press Enter.
4.
The Password prompt displays. Leave this string blank and press Enter. The device
information and Matrix prompt displays as shown in
The Enterasys Matrix N SA 2G4072‐52 is now ready to be configured. For information
about setting the IP address and configuring Telnet settings for remote access to N
Standalone Series management, refer to Chapter 3 in the Enterasys Matrix N Standalone
Series Configuration Guide.
The CLI commands enable you to initially set up and perform more involved
management configurations. The Enterasys Matrix N Standalone Series Configuration Guide
is available online at: