Structure of this guide, Related documents – Enterasys Networks 2G4072-52 User Manual
Page 18
Structure of This Guide
xvi Preface
Structure of This Guide
This preface provides an overview of this guide, explains the symbols used throughout
this guide, and instructs how to obtain technical support from Enterasys Networks.
This guide provides information about the following:
Related Documents
The manuals listed below can be obtained from the World Wide Web in Adobe Acrobat
Portable Document Format (PDF) at the following site:
•
Enterasys Matrix N Standalone Series Configuration Guide provides information on how
to use the Command Line Interface to set up and manage the DFE modules.
•
Cabling Guide provides information on dB loss and cable specifications.
Unlike the Enterasys Matrix N Standalone Series Configuration Guide, the Cabling Guide is
not listed alphabetically on the web site. Instead, it is listed under the Overview Guides
link.
For...
Refer to
...
An overview of the 2G4072‐52
Chapter 1,
Network requirements that must be met
before installing the 2G4072‐52
Chapter 2,
Installation instructions for the 2G4072‐52
hardware
Chapter 3,
Troubleshooting installation problems and
diagnosing network/operational problems
using the LANVIEW LEDs
Chapter 4,
Specifications, environmental requirements,
and physical properties of the 2G4072‐52 and
Mini‐GBICs
Instructions to set the mode switches when
necessary and to remove and replace DIMM
and DRAM SIMM memory
Appendix B,