Enterasys Networks 2G4072-52 - Manual (Page 40)

Connecting to the COM Port for Local Management
3-14 Installation
5. When these parameters are set, the Local Management password screen will display.
Refer to the appropriate Enterasys Matrix N Standalone Series Configuration Guide for
further information.
Figure 3-12 Connecting an IBM PC or Compatible
Connecting to a VT Series Terminal
To connect a VT Series terminal to a Enterasys Matrix N SA 2G4072‐52 COM port
(
Figure 3‐13 ), use a UTP cable with RJ45 connectors and an optional RJ45‐to‐DB25 female
adapter. Proceed as follows:
1. Connect the RJ45 connector at one end of the cable to the COM port on the
Enterasys Networks device.
2. Plug the RJ45 connector at the other end of the cable into the RJ45‐to‐DB25 female
adapter.
3. Connect the RJ45‐to‐DB25 adapter to the port labeled COMM on the VT terminal.
1 UTP cable with RJ45 connectors 3 RJ45-to-DB9 PC adapter
2 RJ45 COM port 4 IBM PC or compatible device
RESET
CONSOLE
CPU
PWR
GROUP
SELECT
GROUP 3
GROUP 2
GROUP 1
В Г Б А