Datavideo RMC-180 Mark II PTZ Camera Controller - Manual (Page 13)

13
PTZ Joystick Control
Note: Before attempting to use the joystick to PAN, TILT
or ZOOM a selected camera, first make sure the LOCK
button is not enabled. If the LOCK button is ON, the
joystick is locked; press the LOCK button to unlock the
joystick.
PAN – Move the joystick left or right to pan the selected
PTZ camera from left to right or vice versa.
TILT – Move the joystick up or down to tilt the selected
PTZ camera up or down.
ZOOM – Twist the joystick clockwise (to the right) or
anti-clockwise (to the left) to zoom in and out on the
selected PTZ camera.
LOCK Button
When enabled, the joystick will be in the lock state. To
resume its functional status, simply press the button
once to unlock the joystick.
Speed
The speed at which the selected camera moves (pan, tilt
and zoom) can be chosen by pressing one of the three
speed buttons.
STR
Pressing this button enters the device into STORE
MODE . When activated, this allows the current camera
position to be stored in a chosen Channel Preset Button.
Press again to exit
STORE MODE .