Datavideo RMC-180 Mark II PTZ Camera Controller - Manual (Page 19)

19
FN4. VIDEO FORMAT
Video output format selection. Available video output formats are:

2160/60p

2160/59.94p

2160/50p

2160/30p

2160/29.97p

2160/25p

720/60p

720/59.94p

720/50p

1080/30p

1080/29.97p

1080/25p

1080/60i

1080/59.94i

1080/50i

1080/60p

1080/59.94p

1080/50p
FN5. POWER
FN5 powers the selected Block/PTZ camera ON / OFF. While executing, the camera is either
rebooting or shutting down.
FN6. SCREEN MODE
The screen mode allows the user to flip the selected camera image in different orientations listed
as follows:

H+V: Horizontal and vertical image flip

H: Horizontal image flip

V: Vertical image flip

OFF: Normal
FN7. MEMORY SPEED
FN7 allows you to adjust the pan/tilt speeds of the pan/tilt settings stored in presets. The speed
range is 1-18.
FN8. TALLY LED MODE
There are generally two tally LED modes, which are Tally User and Tally Input . The Tally User mode
allows the user to directly control the camera tally light. In this mode, the user can toggle between
Tally Off , Tally Red and Tally Green .