Datavideo RMC-180 Mark II PTZ Camera Controller - Manual (Page 17)

17
3. Menu Setup
The LCD panel displays device status as well as the
activated OSD menu.
Press the MENU dial to activate the RMC-180 MARK II’s
setup menu then rotate to scroll the menu up and down.
The PTC/PTR dial opens the OSD menu of PTC and PTR
series cameras. Rotate to browse the menu.
The SELECT/ENTER dial can be used to select a particular menu option or modify the setting.
Rotate to switch between options and push to select a specific item.
In this section, only the RMC-180 MARK II’s setup menu is discussed.
FN1 Exit
FN2 CAMERA ADDRESS ADDR
81
82
83
84
85
86
87
FN3 JOYSTICK DIR
Pan
NORMAL
REVERSE
Tilt
NORMAL
REVERSE
ERROR
FN4 VIDEO FORMAT
2160/60p
2160/59.94p
2160/50p
2160/30p
2160/29.97p
2160/25p
720/60p
720/59.94p
720/50p
1080/30p
1080/29.97p
1080/25p
1080/60i
1080/59.94i
1080/50i
1080/60p
1080/59.94p
1080/50p
FN5 POWER ON EXECUTE