Datavideo RMC-180 Mark II PTZ Camera Controller - Manual (Page 21)

21
FN14. Advanced Mode
FN14 enables/disables the Advanced Mode. Once enabled, Channels A and C will merge to be
Channel A; Channels B and D will merge to be Channel B. Both of which will then have up to 8
memory presets for saving pan/tilt settings. The table below shows the preset button assignments
before and after the merge.
Before After
CH
A
Preset 1 Preset1
CH
A
Preset2 Preset2
Preset3 Preset3
Preset4 Preset4
CH
C
Preset1 Preset5
Preset2 Preset6
Preset3 Preset7
Preset4 Preset8
CH
B
Preset1 Preset1
CH
B
Preset2 Preset2
Preset3 Preset3
Preset4 Preset4
CH
D
Preset1 Preset5
Preset2 Preset6
Preset3 Preset7
Preset4 Preset8
Note: After the Advanced Mode is enabled, the preset button should illuminate red and when
activated, it should illuminate blue.