2 rear panel – connections, Anel, Onnections – Datavideo RMC-180 Mark II PTZ Camera Controller User Manual
Page 14
14
Channel Preset Buttons
These buttons may be used to store up to four camera
positions for each camera. See
pan/tilt settings as well as the panel’s button LED
settings to the channel preset button.
To recall the stored pan/tilt settings, simply press the
corresponding button. The button LED will illuminate
when pressed.
Tally Indicator LEDs
Each set of the four preset buttons is assigned a Tally
Indicator LED. This LED feature becomes active when the
RMC-180 MARK II is connected to the tally output of a
compatible Datavideo Switcher such as the SE-500HD or
SE-650. For example, when the SE-500HD or SE-650
Switcher is sending camera A’s video to the program
output, the RMC-180 MARK II’s channel A tally LED will
be turned ON.
Please note that additional equipment and cabling will
be required for such connection. See
for more information about the port pinout.
2.2
Rear Panel – Connections
Firmware Upgrade
USB type A port for connection to a computer during the
firmware upgrade process. See
for more details.