Datavideo RMC-180 Mark II PTZ Camera Controller - Manual (Page 25)

25
6. Tally Port
The RMC-180 MARK II has the ability to receive tally signals from Datavideo Switchers such as the
SE-500HD or SE-650. Upon receiving the video switcher’s tally output signals, the corresponding
Tally LED indicator on the RMC-180 MARK II Control Panel will be turned ON, giving the operator
an indication of which camera is currently live at the switcher end.
However, the cabling required needs to be custom-made and the port pinout is shown below.
Tally Port Pinout
D-Sub 15-PIN Female
Channel CH 1 CH 2 CH 3 CH 4
PGM Tally PIN 1 PIN 6 PIN 11 PIN 5
PVW Tally PIN 3 PIN 8 PIN 13 PIN 15
GND PIN 4 / 9 / 14