Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 11)

11
Part Names
Front Panel
1. INPUT SELECTOR dial : Switch the input to be
played.
2. ZONE 2 ON/OFF button : Turns ZONE 2 ON/
OFF. ( → p91 )
3. FL OFF indicator : Lights up when the display is
turned off by repeatedly pressing the DIMMER
button on the remote controller.
4. ZONE 3 ON/OFF button : Turns ZONE 3 ON/
OFF. ( → p93 )
5. ZONE CONTROL button : Controls the multi-
zone function. ( → p90 )
6. HOME MENU button : Displays the Home.
( → p106, p134, p139 )
7. Display ( → p13 )
8. Cursor buttons ( / / / ) and ENTER
button : Select the item with the cursors, and
press ENTER to confirm. Use them to tune to
stations when using TUNER. ( → p66 )
9. NETWORK indicator : This lights when "NET"
is selected with the input selector and the unit
is connected to the network. Lights up when
any of the following functions is working or
enabled in standby state of this unit. When this
indicator is lighting, the power consumption in
standby state increases, however, the increase
in power consumption is minimized by entering
the HYBRID STANDBY mode where only the
essential circuits operate. It does not light when
ZONE 2/ZONE 3 is on, however.
– HDMI CEC ( → p124 )
– HDMI Standby Through ( → p124 )
– USB Power Out at Standby ( → p126 )
– Network Standby ( → p127 )
– Bluetooth Wakeup ( → p127 )
10. Advanced MCACC indicator : This lights when
you have enabled the speaker calibration made
with MCACC. ( → p135, p152 )
11. Remote control sensor : Receives signals from
the remote controller.
• The signal range of the remote controller is
within about 16´/5 m, at an angle of 20° on the
perpendicular axis and 30° to either side.
12. RETURN button : Returns the display to the
previous state.
13. MASTER VOLUME