Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 143)

143
Setup
Bluetooth Bluetooth
Change the settings for the BLUETOOTH function.
• Wait for a while if "Bluetooth" cannot be selected. It will appear when the
BLUETOOTH function is started up.
„
Bluetooth Receiver
‰ Bluetooth Receiver (Default Value: On)
Select whether or not to use the function that receives audio from BLUETOOTH
wireless technology enabled devices.
On When this function is used
Off When this function is not used
‰ Auto Input Change (Default Value: On)
When a BLUETOOTH enabled device is played while it is connected to the unit,
the input of the unit can be automatically switched to "BLUETOOTH".
On The input will automatically become "BLUETOOTH" when a
BLUETOOTH enabled device is connected.
Off The function is disabled.
• If the input is not switched automatically, set to "Off" and
change the input manually.
‰ Auto Reconnect (Default Value: On)
This function automatically reconnects to the BLUETOOTH wireless technology
enabled device connected last when you change the input to "BLUETOOTH".
• This may not work with some BLUETOOTH wireless technology enabled
devices.
On When this function is used
Off When this function is not used
‰ Pairing Information (Default Value: -)
You can initialize the pairing information stored on this unit. If you are no longer
able to connect with a device you have paired, try doing this. ( → p165 )
Pressing ENTER when "Clear" is displayed initializes the pairing information
stored on this unit.
• This function does not initialize the pairing information on the BLUETOOTH
wireless technology enabled device. When pairing the unit again with the
device, be sure to clear the pairing information on the BLUETOOTH wireless
technology enabled device in advance. For information on how to clear the
pairing information, refer to the BLUETOOTH wireless technology enabled
device's instruction manual.
‰ Device (Default Value: -)
Displays the name of the BLUETOOTH wireless technology enabled device
connected to the unit.
• The name is not displayed when "Status" is "Ready" and "Pairing".
‰ Status (Default Value: -)
Displays the status of the BLUETOOTH wireless technology enabled device
connected to the unit.
Ready Not paired
Pairing Paired
Connected Successfully connected