Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 13)

13
Display Display
1. / / / : These may light when performing
operations while "NET" or "USB" is selected
with the input selector. / light when there are
multiple folders or files that are available to be
selected. / light when text information does
not fit with the range provided by " H ".
2. Lights in the following conditions.
Z2/Z3 : ZONE 2/ZONE 3 is on.
: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET : Lights when connected to the network with
the "NET" input selector. It will blink if incorrectly
connected to the network.
USB : Lights when the "USB" input selector is
selected, a USB device is connected and the
USB input is selected. It will blink if the USB
device is not properly connected.
HDMI : HDMI signals are input and the HDMI
input is selected.
DIGITAL : Digital signals are input and the digital
input is selected.
3. Lights according to the type of input digital audio
signal and the listening mode.
4. Lights in the following conditions.
RDS (European, Australian and Asian models):
Receiving RDS broadcasting.
TUNED : Receiving DAB (European models)/AM
(North American, Australian and Asian models)/
FM radio
STEREO : Receiving FM stereo.
SLEEP : Sleep timer is set. ( → p126 )
AUTO STBY : Auto Standby is set. ( → p126 )
5. Displays the audio output destination.
A : Outputs audio only to ZONE A.
B : Outputs audio only to ZONE B.
AB : Outputs audio to both ZONE A and ZONE B.
6. Lights when headphones are connected.
7. Blinks when muting is on.
8. Displays various information of the input signals.
9. Lights when adjusting the volume.
10. Speaker/Channel display : Displays the output
channel that corresponds to the selected
listening mode.