Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 117)

117
Setup
Speaker
„
Distance
Set the distance from each speaker to the listening position.
‰ Front Left (Default Value: 10.0 ft/3.00 m)
Center (Default Value: 10.0 ft/3.00 m)
Front Right (Default Value: 10.0 ft/3.00 m)
Height 1 Left (Default Value: 10.0 ft/3.00 m)
Height 1 Right (Default Value: 10.0 ft/3.00 m)
Height 2 Left (Default Value: 10.0 ft/3.00 m)
Height 2 Right (Default Value: 10.0 ft/3.00 m)
Surround Right (Default Value: 10.0 ft/3.00 m)
Surr Back Right (Default Value: 10.0 ft/3.00 m)
Surr Back Left (Default Value: 10.0 ft/3.00 m)
Surround Left (Default Value: 10.0 ft/3.00 m)
Subwoofer (Default Value: 10.0 ft/3.00 m)
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the
remote controller. When using the unit "feet", the setting is available in
increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the
setting is available in increments of 0.03 m from 0.03 m to 9.00 m.
• When measurements are made using Dirac Live ( → p150, p154 ), units are
displayed as "msec" and the value cannot be changed.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
„
Channel Level
Adjust the volume level of each speaker.
‰ Front Left (Default Value: 0.0 dB)
Center (Default Value: 0.0 dB)
Front Right (Default Value: 0.0 dB)
Height 1 Left (Default Value: 0.0 dB)
Height 1 Right (Default Value: 0.0 dB)
Height 2 Left (Default Value: 0.0 dB)
Height 2 Right (Default Value: 0.0 dB)
Surround Right (Default Value: 0.0 dB)
Surr Back Right (Default Value: 0.0 dB)
Surr Back Left (Default Value: 0.0 dB)
Surround Left (Default Value: 0.0 dB)
Subwoofer (Default Value: 0.0 dB)
Select a value between "-12.0 dB" and "+12.0 dB" ("-15.0 dB" and "+12.0 dB" for
Subwoofer) (in 0.5 dB increments). A test tone will be output each time you change
the value. Select the desired level.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.