Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 118)

118
Setup
Speaker
„
Dolby Enabled Speaker
Change the settings of Dolby Enabled Speakers.
• This setting can be selected when "Configuration" - "Height 1 Speaker" /
"Height 2 Speaker" is set to "Dolby Speaker".
‰ Distance from the ceiling (Default Value: 6.0 ft/1.80 m)
Set the distance between the Dolby Enabled Speaker and the ceiling. Select
between "0.1 ft"/"0.03 m" and "15.0 ft"/"4.50 m" ("0.1 ft"/"0.03 m" units).
• The unit of distance (ft/m) is displayed using the unit selected for the
"Distance" setting.
‰ Reflex Optimizer (Default Value: Off)
You can enhance the reflection effect of Dolby Enabled Speakers from the
ceiling.
• The function is not effective if the listening mode is Pure Direct.
• The function is not effective if "Dirac Live" ( → p76 ) has been enabled.
Off When this function is not used
On When this function is used
„
Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and Off.
‰ Speaker Virtualizer (Default Value: On)
On The listening mode with virtual speaker effect such as
F.S.Surround can be selected.
Off The listening mode with virtual speaker effect such as
F.S.Surround cannot be selected.