Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 112)

112
Setup
Input/Output Assign
„
Input Skip
You can skip inputs to which nothing is connected when selecting them with the
INPUT SELECTOR dial on the main unit or with the INPUT SELECT button on
the remote controller.
‰ BD/DVD (Default Value: Use)
GAME (Default Value: Use)
CBL/SAT (Default Value: Use)
STRM BOX (Default Value: Use)
HDMI 5 (Default Value: Use)
HDIM 6 (Default Value: Use)
AUX (Default Value: Use)
CD (Default Value: Use)
TV (Default Value: Use)
PHONO (Default Value: Use)
TUNER (Default Value: Use)
NET (Default Value: Use)
USB Front (Default Value: Use)
USB Rear (Default Value: Use)
BLUETOOTH (Default Value: Use)
Use Use this input.
Skip Skip this input.
„
PERSONAL PRESET Information
Confirm the registered contents of 1 to 3 buttons of PERSONAL PRESET.
The registered settings are displayed in the list.
‰ Preset (Default Value: Preset 1)
Selects a preset number from among "Preset 1", "Preset 2" and "Preset 3".
(Main)
Setting Item Default Value Setting Details
Input Selector --- Displays the input selector that has been set.
HDMI Out --- Displays the output destination (HDMI) that
has been set.
Network Service --- Displays the set network service and station
name.
Band/Station --- Displays the set "AM", "FM" or "DAB" band
and the Preset Name for the station.
Listening Mode --- Displays the listening mode that has been
set.
Volume --- Displays the volume level that has been set.
(Upper limit "0.0 dB")
Multi Zone --- Displays the output destination (Multi Zone)
that has been set.
• "Band/Station" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Band/Station" (only when the input selector is set to
"TUNER") is displayed with the name set by "Source" - "Name Edit". If the
name is not set, the frequency of the radio station is displayed instead.