Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 16)

16
Remote Controller Remote Controller
1. STANDBY/ON button
2. PERSONAL PRESET 1/2/3 buttons : Registers
the current setting conditions such as input
selector, listening mode, etc. or call the
registered settings. ( → p94 )
3. Input selector buttons : Switches the input to be
played.
4. Play buttons : Used for playback operations
for the Music Server ( → p98 ) or USB device
( → p96 ). Also, switching to "CEC MODE"
with "21. MODE button" allows you to operate
an HDMI CEC function-enabled AV component.
(Some devices may not be operated.)
5. (AV ADJUST) button : Settings such as
"HDMI" and "Audio" can be made quickly during
play on the TV screen. ( → p74 )
6. Cursor buttons and ENTER button : Select
the item with the cursors, and press ENTER to
confirm your selection. When the folder or file
lists are not shown on one screen on the TV,
press / to change the screen.
7. button : Displays the Home.
( → p106, p134, p139 )
8. SLEEP button : You can allow the unit to enter
standby automatically when the specified time
has elapsed. Select the time from "30 min", "60
min", "90 min" and "Off". When you do not want
to turn the unit to standby automatically, select
"Off". You can also set this by pressing the
button on the remote controller to display the
Home screen and selecting "System Setup" -
"Hardware" - "Power Management" - "Sleep
Timer" ( → p126 ).
9. HDMI MAIN/SUB button : Select the HDMI OUT
jack to output video signals from "MAIN", "SUB",
and "MAIN+SUB".
10. INPUT SELECT button : Switches the input to be
played.
11. (STATUS) button : Switches the information
on the display and is used to operate RDS.
( → p67 )
12. button : Returns the display to the previous
state.
13. MUTE button : Temporarily mutes audio.
Press the button again to cancel muting.