Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver - Manual (Page 123)

123
Setup
Source
„
Audio Select
Select the priority for input selection when multiple audio sources are connected
to one input selector, such as connections to both the "BD/DVD" HDMI IN jack
and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each
input selector button. Select the input selector to configure. Note that there are
some default values you cannot change.
‰ BD/DVD (Default Value: HDMI)
GAME (Default Value: HDMI)
CBL/SAT (Default Value: HDMI)
STRM BOX (Default Value: HDMI)
AUX (Default Value: HDMI)
CD (Default Value: COAXIAL)
TV (Default Value: OPTICAL)
PHONO (Default Value: Analog)
ARC When giving priority to input signal from ARC compatible TV.
• This item can be selected only when "Hardware" - "HDMI" -
"Audio Return Channel (eARC supported)" is set to "On" and
also the "TV" input is selected.
HDMI When giving priority to input signal from HDMI IN jacks
• This item can be selected only when the input to be set is
assigned to the HDMI jack in the "Input/Output Assign" -
"HDMI Input" setting.
COAXIAL When giving priority to input signal from DIGITAL AUDIO IN
COAXIAL jacks
• This item can be selected only when the input to be set is
assigned to the COAXIAL jack in the "Input/Output Assign" -
"Digital Audio Input" setting.
OPTICAL When giving priority to input signal from DIGITAL AUDIO IN
OPTICAL jacks
• This item can be selected only when the input to be set is
assigned to the OPTICAL jack in the "Input/Output Assign" -
"Digital Audio Input" setting.
Analog When giving priority to the input signal from AUDIO IN jacks
• This item can be selected only when the input to be set is
assigned to the AUDIO IN jack in the "Input/Output Assign" -
"Analog Audio Input" setting.
‰ Fixed PCM (Default Value: Off)
Select whether to fix input signals to PCM (except multi-channel PCM) when
you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set
this item to "On" if noise is produced or truncation occurs at the beginning of a
track when playing PCM sources. Select "Off" normally.
• Each time the "Audio Select" setting is changed, the setting is restored to
"Off".
• The setting cannot be changed when "TUNER", "NET", "USB", or
"BLUETOOTH" input is selected.