Setup, Using an equalizer you have registered – Pioneer Elite VSX-LX305 9.2-Channel Network A/V Receiver User Manual
Page 156
156
Setup
1
2
5
6
4
3
1
The speaker currently being adjusted. To adjust another speaker, tap the " "
next to it and select another speaker.
2
Displays the Menu screen. From the menu, you perform actions such as reset
the speaker adjustments and cancel and exit the adjustments. You can also
copy data from other slots.
3
Drag the points on the equalizer curve side to side to change the frequency
and up or down to change the boost.
• You can add a point by tapping on the curve where there isn't a point.
4
Recalculate the characteristics from the adjusted content.
5
Transfer the adjusted content to the unit.
6
The value of the point being adjusted. Tap the " " next to the point to delete
it.
5.
When adjustment is finished, tap
4
to recalculate, then tap
5
to transfer the
adjusted data to the unit.
•
In the Home screen, when the number of speaker channels, etc., is changed
in "System Setup" - "Speaker" - "Configuration", the adjusted content is
deleted.
Using an equalizer you have registered
When you select a saved slot in "Room EQ" - "Dirac Live" (
) in "AV
Adjust", you can use the registered equalizer.