Tascam Model 24 - Digital Mixer, Recorder, and USB Audio Interface - Manual (Page 17)

TASCAM Model 24
17
1 – Introduction
Items included with this product
This product includes the following items.
Take care when opening the package to avoid damaging the
items. Keep the packing materials for transportation in the
future. Please contact the store where you purchased this unit
if any of these items are missing or have been damaged during
transportation.
0 Main unit................................................................................................× 1
0 Power cord.............................................................................................× 1
0 Owner’s Manual (this document) including warranty...........× 1
Conventions used in this manual
In this manual, we use the following conventions:
0 When we refer to buttons, connectors and other parts of this
unit and other equipment, we use a bold font like this: MENU
button.
0 When we show characters that appear on the display, the
typeface looks like this: MENU .
0 The four buttons under the display are called the function
buttons. From left to right, they are shown as buttons F1 ,
F2 , F3 and F4 . Moreover, the functions at the bottoms of the
screens will be shown after the button names.
Examples: F1 button, F4 button
0 SD/SDHC/SDXC memory cards are referred to as “SD cards”.
0 Computers, portable audio devices and other equipment
connected to this unit using Bluetooth are called “Bluetooth
devices”.
0 Groups of recorded data are referred to as “songs”.
0 The song that is currently selected is called the “current song”.
0 Information shown on a computer display is written like this:
OK .
0 As necessary, additional information is provided under TIP,
NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
ATTENTION
Failure to follow these instructions could result in damage to
equipment or lost data, for example.
V CAUTION
Failure to follow these instructions could result in injury.
Product registration
Customers in the USA, please visit the following TASCAM web-
site to register your TASCAM product online.
https://tascam.com/us/
Precautions for placement and use
0 The operating temperature range of this unit is 5–35 °C.
0 Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause mal-
function.
Places with significant vibrations
Next to a window or in another location exposed to direct
sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
0 To enable good heat dissipation, do not place anything on
top of the unit.
0 Do not place the unit on top of a power amplifier or other
device that generates heat.
Notes about power supply
0 Insert the included power cord all the way into the AC IN
connector.
0 Do not connect a power supply other than one that is
AC100V - 240V (50/60Hz).
0 Hold the power cord by its plug when connecting or discon-
necting it.
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change.
To prevent this, or if this occurs, let the unit sit for one or two
hours at the new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe with
chemical cleaning cloths, thinner, alcohol or other chemical
agents. Doing so could damage the surface or cause discoloration.
About TASCAM customer support service
TASCAM products are supported and warrantied only in their
country/region of purchase.
To receive support after purchase, on the TASCAM Distributors
list page of the TEAC Global Site ( http:// teac-global.com/ ),
search for the local company or representative for the region
where you purchased the product and contact that organization.
When making inquiries, the address (URL) of the shop or web
shop where it was purchased and the purchase date are required.
Moreover, the warranty card and proof of purchase might also be
necessary.