Tascam Model 24 - Digital Mixer, Recorder, and USB Audio Interface - Manual (Page 34)

34
TASCAM Model 24
4 – Managing Songs
Protecting/unprotecting songs
By protecting a song, you can disable editing, recording and
deletion operations for that song.
You can protect and stop protecting songs.
1. Open the SONG Screen when the recorder is stopped. (See
“Menu operation procedures” on page 27.)
2. Select the song that you want to protect or unprotect and
press the MULTI JOG dial to open the menu list pop-up.
3. Select PROTECT or UNPROTECT , and press the MULTI JOG
dial.
The
PROTECT or UNPROTECT screen will open.
4. Press the F4 button to protect or unprotect the song.
NOTE
To cancel protection or unprotection, press the F1
button.
5. When song protection or unprotection completes, the SONG
Screen reopens.
NOTE
i icons appear before songs that are protected in the song
list shown for copying, deletion and other operations.
i If you try to execute a prohibited operation (editing, record-
ing, deletion) on a protected song, “ Song is protected. ”
will appear in a pop-up message on the display.
Editing song names
1. Open the SONG Screen when the recorder is stopped. (See
“Menu operation procedures” on page 27.)
2. Select the song with name that you want to change and
press the MULTI JOG dial to open the menu list pop-up.
3. Select RENAME , and press the MULTI JOG dial.
The RENAME Screen will open.
4. Edit the song name.
For details about how to edit song names, see “Editing text”
below.
NOTE
To cancel song name editing, press the F1 button.
5. When finished editing the song name, press the F4
button to confirm the song name.
When song name editing is complete, the
SONG Screen
reopens.
Editing text
Use these operations to edit text.
Changing the cursor (editing point) position:
Use the F2 and F3 buttons.
You can also press the MULTI JOG dial to move to the next
character.
Deleting the character at the cursor position:
Turn the MULTI JOG dial.
You can input up to 11 characters, including symbols, num-
bers, and uppercase and lowercase letters.
Leaving a single space open:
Turn the MULTI JOG dial to select a blank space at the left
end of any row, and press the MULTI JOG dial.
Canceling edits:
Press the F1 button.
Confirming the changes:
Press the F4 button.