Tascam Model 24 - Digital Mixer, Recorder, and USB Audio Interface - Manual (Page 25)

TASCAM Model 24
25
2 – Names and Functions of Parts
Home Screen
When the Meter Screen is open, press the MENU button to open
the Home Screen.
1
Repeat playback status
An icon appears when the repeat playback function is on.
(See “Repeat playback function” on page 40.)
2
Song format
This shows the current song file format.
44.1kHz, 16bit
44.1kHz, 24bit
48kHz, 16bit
48kHz, 24bit
NOTE
If no song is loaded, the operation format of the unit will be
shown like or .
3
Automatic punch in/out function on/off status
The icon appears when the automatic punch in/out
function is on. (See “Automatic punch in/out function” on
page 41.)
4
SD card present status
When an SD card is loaded, the icon appears.
When an SD card is protected, the icon appears.
Since system files cannot be updated when the icon
appears, automatic punch in/out settings will not be retained
and previously loaded songs will not be loaded when the
unit is turned on again.
5
USB connection status
During USB connection, the icon appears.
6
Song name
This shows the name of the current song.
If a song is protected, an icon appears before the file name.
(See “Protecting/unprotecting songs” on page 34.)
If a song has unsaved marks, an icon appears before the
file name. (See “Adding marks” on page 45.)
7
Transport status
This icon shows the recorder operation status.
Indicator Meaning
8 Stopped at the beginning of the file
9 Paused
0 Recording
7 Playback
8
Playback position
The current playback position is shown by a bar.
9
Automatic punch in/out point setting status
When the automatic punch in/out function is on, these show
the status of automatic punch in/out point setting.
Punch in point
Punch out point
0
Remaining time
The remaining time available for recording on the SD card is
shown (in hours: minutes: seconds).
NOTE
The remaining recordable time on an SD card depends on
the number of recording channels and SD card capacity.
q
Built-in effect status
When a built-in effect is on, the number of the effect in use is
shown.
When the built-in effect is off, the
icon appears. (See
“Using the built-in effects” on page 38.)
w
Recorder time counter
This shows the elapsed time from the beginning of the song.
e
Mark indicators
An icon is shown at each mark.
r
Song length
This shows the length of the current song (in hours: minutes:
seconds).
t
Function button functions
This shows the functions assigned to the function button on
the Home Screen.
i F1 button: This opens the Meter Screen.
i F2 button: This turns the repeat playback function
on/off.
i F3 button: This returns to the state before the
previous operation.
i F3 button: This restores the state after the previous
operation.
i F4 button: This turns the built-in effect on/off.
i F4 button: This adds/deletes marks.
NOTE
i The F3 button and indicators appear when
those operations are possible.
i Set the F4 button function on the KEY FUNCTION screen. (See
“Using mark functions” on page 45.)