Control input/output, Computer system requirements, Windows – Tascam Model 24 - Digital Mixer, Recorder, and USB Audio Interface User Manual

Page 61: Supported audio drivers, Audio performance, Windows mac supported audio drivers, 14 – specifications, Footswitch jack, Usb port, Supported operating systems

Advertising
background image

TASCAM Model 24

61

14 – Specifications

Control input/output

FOOTSWITCH jack

Connector: 6.3mm (1/4”) standard TS jack (Tip: HOT, Sleeve:

GND, Unlatch type correspondence)

USB port

Connector: 4-pin USB B-type
Protocol: USB 2.0 HIGH SPEED (480 Mbps)

Computer system requirements

Check the TEAC Global Site (http://teac-global.com/) for the

latest information about supported operating systems.

Windows

Supported operating systems

Windows 10 32-bit
Windows 10 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 7 32-bit SP1 or later
Windows 7 64-bit SP1 or later
(Windows 8, Windows Vista and Windows XP are not supported)

Computer hardware requirements

Windows computer with a USB 2.0 port

CPU/processor speed

2 GHz or faster dual core processor (x86)

Memory

2 GB or more

ATTENTION

Operation of this unit was confirmed using standard com-

puters that meet the above requirements. This does not

guarantee operation with all computers that meet the above

requirements. Even computers that meet the same system

requirements might have processing capabilities that differ

according to their settings and other operating conditions.

Mac

Supported operating systems

macOS Mojave (10.14 or later)
macOS High Sierra (10.13 or later)
macOS Sierra (10.12 or later)
OS X El Capitan (10.11 or later)

Computer hardware requirements

Mac with a USB 2.0 port

CPU/processor speed

2 GHz or faster dual core processor

Memory

2 GB or more

Supported audio drivers

Windows

ASIO2.0, WDM

Mac

Core Audio

Audio performance

Noise

Residual output noise (22kHz, A-weighted)

MAIN MIX OFF: -100 dBu
MAIN MIX -0dB, 1ch-0dB: -80 dBu

Equivalent input noise (EIN)

-128 dBu (Rs=150 Ω, MIC IN

w

INSERT SEND, gain knob at

MAX, A-weighted)

Total harmonic distortion ratio (THD+N)

(gain knob at MIN, 1kHz)

MIC IN

w

MAIN OUT: 0.01% or less

MIC IN

w

MAIN OUT: 0.004% @+4dBu

Frequency response

(All

GAIN

knobs minimized, 1 kHz)

20 Hz to 30 kHz (+0.5/–1.0 dB, analog)
20 Hz to 20 kHz (+0.5/–1.0 dB, digital)

Crosstalk

(

PAN

knobs turned completely left or right, 1 kHz)

Between channels: -80 dB
Between input and output: -80 dB

Maximum gain

(All

GAIN

knobs maximized,

PAN

knobs turned completely

left or right,

EQ

knobs and

STEREO GRAPHIC EQ

faders at

middle positions)

MIC

w

MAIN OUT: 74 dB

MIC

w

INSERT OUT: 54 dB

MIC

w

SUB OUT: 74 dB

MIC

w

CONTROL ROOM OUT: 79 dB

MIC

w

MONITOR OUT: 75 dB

MIC

w

FX OUT: 75 dB

USB/SD

w

MAIN OUT: 24 dB

Phantom Power

+48V

Advertising