Pluto Trigger - Manual (Page 13)

 Hold : press to open shutter, release to end exposure
 Lock : press to open shutter, press again to end exposure
 Bulb : set exposure time, press to take a picture
 Burst : set interval, press to start a exposure sequence
 Timed : set countdown and start, take a picture when countdown
finishes
For “Hold”, “Lock” and ”Bulb” release modes, set your camera to BULB
mode. For others, you may use any exposure mode on the camera,
including fully automatic exposure modes. Please note that Manual focus
mode should still be used.
Usage
1. Make sure your camera is connected and set up.
2. Make sure Pluto Trigger is connected.
3. Select "Shutter Release" from app’s menu.
4. Select a release mode; set the time if needed.
5. Press the "Start" button to take a picture.
NOTE 1 : If you would like to pre-focus before exposure, switch your camera
to Auto focusing; and select appropriate focus time in app’s “Settings”
menu, depending on the light condition and your camera model.
NOTE 2 : Depending on your camera model and chosen mode, select
appropriate shutter pulse length in app’s “Settings” menu. For example,
you may need to choose longer pulse length when Live View is turned on.
4.2 T
IME
-L
APSE