Pluto Trigger - Manual (Page 37)

Panasonic
Olympus 
Pentax 
Minolta  
PowerShot 
8.2.2 C
AMERA
B
RAND
Default: Off
Change this setting to match you camera brand. Infrared remote of
different brand emit different signal.
You can set this setting to “All brands”, then Pluto Trigger will emit infrared
signal of all brands. Thus, you can use Pluto Trigger as an infrared remote
for all supported brands.
8.3 B
URST
Change this setting if you want to take multiple pictures when trigger is
fired. This setting only applies in “Pluto Sensor Modes”.
8.3.1 B
URST
C
OUNT
Default: 0
Set this value to the number of pictures you want to take when Pluto
Trigger is fired.
8.3.2 B
URST
I
NTERVAL
Default: 0.5”
Change this setting to set the time interval, at which multiple pictures are
taken.